Discussion Locked

IDE Hard Drive

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Everytime I turn on my computer It starts to beep, But nothing happens. Could I have placed the cables incorrectly? or does my hard drive need to be replaced all together.

Please respond
Alicia R.

2 replies

by thechas

Constant beeps at boot are usually from a video or RAM problem.

I often run into AGP cards that do not fully seat in the AGP slot of the motherboard.
If the card is even a few thousandths of an inch from being fully seated, you can get a BIOS video error.

If the beeps at boot sound more like a siren, that is the BIOS PC Health monitor.
Either your CPU fan is not spinning fast enough, or is not connected to the correct fan header on the motherboard.

Chas

This discussion is closed to new replies.