Question Locked

IDE to SATA converted DVD writer not recognized by BIOS

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am trying to connect my old Sony DRU 800A DVD writer whihc has an IDE interface to Dell E521 motherboard that has only SATA drive interfaces.

I tried all jumper settings on the DVD writer, still the BIOS does not recognize.

OS is Windows XP.

Can anyone help?

2 replies

by hal 9000

What hardware adapter are you attempting to use? More importantly as SATA Drives are invisible to BIOS generally speaking how can it work as a Boot drive to load the OS?

If you are connecting this to a single IDE Cable it should be set to Master and on the end of the cable. The Optical Drive will still not be seen in BIOS as it has no Physical proprieties but it should be seen on th Boot Up after the Memory Test it should be listed as attached Hardware.
If you have Windows running and are unable to see this drive in there.

We need to know how it's connected to a SATA Port to answer your question.

Col

This discussion is closed to new replies.