6 replies
by crazyfrog0911 Accepted solution
by jck Accepted solution
the drive went bad. Seems like it can't retrieve data via the head.
Sorry to hear that for you.
by crazyfrog0911 Accepted solution
Thanks for your concern. Do you have any solution by which I can recover my data?
Please help!
Thanks,
Tony.
by 1bn0 Accepted solution
by hal 9000 Accepted solution
by oh smeg Accepted solution
http://www.tacktech.com/display.cfm?ttid=287
If the HDD fails this test remove it fit it to another computer and test again. If it still fails the test pack it up and ring around the Data Recovery Houses in your area and ask if they can deal with a Dead HDD. Then when you find one send it to then to recover your Data.
If ti passes the second Test your M'Board, Data Lead or Power Supply in the original computer is faulty and needs attention before you can start to deal with your Data Loss issue.
Just a word of warning the last Dead HDD that I had to have recovered cost 56K but that was a urgent Job that had to be recovered within 24 Hours so I paid a Premium for the service.
Just because the drive spins up doesn't mean that it is working it only means that the Motor that spins the platters is running and in no way implies that the Circuit Board on the Bottom of the HDD is working or that the Servo Motor that moves the Read Write Heads is working or moving to the correct places in the correct steps. ;)
Col
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending