6 replies
by rawright
Assuming your server is WinNT, the drives do not have to be identical, but the partitions in the stripe set have to be the same size. The disk controller handles the hardware details, while the OS deals only with them logical drives. Install your new drives and create a partion on each identical in size to those in your existing stripe set, then add the new ones to the set. One note I found in the documentation is that the boot and system partition must not be in the stripe set, and once youhave set the configuration, be sure to commit the changes immediately, rather than simply letting the system do it in its own good time.
This only applies if you are using the OS to control the RAID set; if you are using a hardware RAID controller the specific manufacturer may have different requirements.
by rawright
by computechie
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending