Discussion Locked

Identify onboard sound and video

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a system that I had to do a complete re-install, as it would not boot into OS. As such I could not see what drivers they used for onboard sound and video. Is there anyway I can identify what drivers I need to download?
In the bios I see a setting for Onboard AC97 Audio, so I need know where and how to get right driver. There is also a bios setting for SB and MPU401 but disabled, and most onboard is AC97, so I will assume this is the audio.

Cant find any glues for the on Board AGP video,

The motherboard has no model or name I can find, but the only identifying marks are 2 Via chips

A LArge one Via VT8601A and a smaller chip
Via VT82C68613

Any help much appreciated, if you need more info just ask, but so far thats all I could fine in Bios and on Motherboard.

7 replies

by sgt_shultz

i googled 'via chipset driver' and got some interesting hits. like www.viaarena.com. search for the VIA 4-in-one chipset drivers for your motherboard...would contain the video and sound drivers, everything you need...using the BIOS number and/or the numbers on the chip...

by thechas

Watch the splash screen when you first boot up the PC, and capture the BIOS string that is near the lower left corner of the screen when the memory is being tested.

With the above information, go to either
www.motherboards.org
or www.wimsbios.com
and use the Motherboard ID tools they have to find who made the motherboard.

NOTE: IF this motherboard is in an OEM system, the motherboard manufacture may not provide ANY support for the motherboard.
Usually for OEM systems, support is limited to the original system manufacture.

That said, I would start by installing the VIA 4 in 1 driver.

The on-board sound likely uses VIA's AC97 codec. So, you may be able to simply install the VIA sound driver.

Both drivers can be downloaded from www.viaarena.com

As to the on-board AGP. There should be another large IC on the motherboard.
This will be the graphics processor.
SiS, S3 and ATI are common suppliers of on-board graphics processors.
You may be able to use the reference drivers for the GPU from the manufactures web site.

Chas

by pctech

As The Chas has stated, the VIA 4in1 drivers need to be installed. This will also install the AGP miniport driver needed before installing the video drivers.
The video card usually will be the first thing displayed when booting the computer, such as nVidia, ATI Rage, or STB Velocity. Should this not occur, look at the video card itself for identification. They are almost always screen printed with the manufacturer and model, if not and there is no heatsink mounted on the chip, read the chipset itself and download the drivers for that chipset. Should you be lucky enough to have a nVidia card, there is a download from nVidia that covers all of the nVidia chipsets.

I hope this helps

This discussion is closed to new replies.