Discussion Locked

If a printed circuit or a solder joint on a hardware part is damaged

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Dear all

1.
If there is a microscopic gap in just one printed circuit, on a hardware part - it renders the whole hardware part useless?
If not, which hardware parts can partially work, despite one or more printed circuits being damaged?

2.
If there is a microscopic gap in just one solder joint, on a hardware part - it renders the whole hardware part useless?
If not, which hardware parts can partially work, despite one or more solder joints being damaged?

3.
Could a bended hardware part
Or
A broken circuit on a hardware part
Or
A broken solder joint on a hardware part
Change or influence how:
Data is created in the CPU and written to the drive?
For example, the file was written to the drive, but it would be corrupted.

Thank you

7 replies

by kees_b

If some part of the hardware is damaged enough to influence the way it functions, something that depends on that part might go wrong. Then you repair it or replace it.

by Oblivion99

In regard of the proces and hardware parts responsible for creating data and write the data to the drive - could that be influenced?
So the proces could happen, but the data would be corrupt?

by Oblivion99

I have backed up all my data on a USB drive.

Could you please try to answer my questions?

Especially:
3.
Could a bended hardware part
Or
A broken circuit on a hardware part
Or
A broken solder joint on a hardware part
Change or influence how:
Data is created in the CPU and written to the drive?
For example, the file was written to the drive, but it would be corrupted.

Thank you

by birdmantd edited

It could be any of the items you asked about, or it could be none of them. This issue is not easily determined without a hands-on diagnostic to determine the issue/solution. The best solution is to go to a computer repair shop if you can't find/fix it yourself.

One more potential problem that you haven't been able to confirm is whether the issue is on the motherboard or a expansion card (video, communications boards for example). That could easily be the issue, but we cannot determine that remotely.

This discussion is closed to new replies.