Discussion Locked

Initializing Plug and Play

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

A windows 95 computer will not bootup. The last message it gives is that it is initializing plug and play. I cannot get it to boot to safe mode. I read somewhere there are some shortcut keys to use to get it to boot. I cannot remember them. Canyou help me or is it the hard drive is gone? Our technologist says it is a lost cause. I have heard otherwise. I do not want to loose all the information on the hard drive again if it is not necessary.

Thank you for any help you can render.rogersblr@yahoo.com

5 replies

by aplus_certifiable

In the F keys when you start Press F8 to get into safe mode, if that doesn't work try again pressing F5. You maybe able to get it into safe mode from there

by swilkinson

If you really cant get into it then you should still be able to save the information on the root drive.

You will probably have to install Windows on another drive and boot from that - if you connect the original as a slave to this then you can transfer the information over and then reinstall Windows on the original.

As a security precaution I always have a secondary drive on which only data is stored.
This enables one to safely format if necessary.

Once formatted and reinstalled, you may have even rescued the original drive from certain destruction.

This discussion is closed to new replies.