9 replies
by gutridgesj
i am currently looking into th hp g85 multifunction printer/copier/etc. it is only $600
you could also make people print more drafts until the doc is really ready for the good quality color. and also to have them print drafts in b/w until the final copy is ready.
however, does your business really require that much "color" printing? Or are people just printing in color because it is there?
by dcassat
Hmmm, good printer but kind of expensive. To be more specific I'm looking for something below 1200 USD. I found so far the HP1100XI, still thinking on it, but yes it will be definitelly an HP.
Thanks
by robbi61
Inkjet printers cost less at the onset, but if you are looking at overall costs, the color LaserJet 4500/4550 would be the way to go. Your cost per page of printing is much less than the InkJet. With the apparent quantity of printing you are doing,this would be something to look at as well as the original cost of the printer.
However, if you are determined to spend less money, and get quality prints, may I suggest the 1600c DeskJet. The quality of color print is very near that of a plotter,and with separate cartridges for each color, you only replace the color that you are out of, rather than replacing the entire ink cartridge when one color or another runs out first. This will reduce your ink cost slightly. The cost of this printer is still within your range, and it can be purchased with an optional lower paper tray for convenience as well.
How about the cost of a 1600c DeskJet? And the cartridges ?
Thanks
by robbi61
hi,
I didn't know you wanted exact prices. The best I can do for you is HP list prices... you might be able to find these items cheaper... or they may be a little more depending on where you are. Figure around $500 for the 1600c printer, Color cartridges run $33.00 for each (remember, one cartridge for each color cyan, magenta, and yellow) and $30.00 for the black cartridge. Hope this helps. I'm not a salesperson, only a printer tech. I CAN tell you that service calls on the 1600c are minimal... which means fewer repairs, less cost there.
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending