Discussion Locked

installing a scsi adapter

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a scsi hard disk and card adapter and I want to install it in a ASUS CUSL2 mother board, using the SCSI H.D. as the primary master disk the CPU can not detect the SCSI adapter using any of the 6 PCI slot. Does anyone know how I can configure the PCI configuration so that any of the PCI slot can detect the SCSI adapter so that the computer will boot using the OS from my SCSI H.D.

7 replies

by thechas

You need to enter BIOS setup and set your boot options to use the SCSI interface as your boot device.

As long as the SCSI bios is enabled (auto)
And SCSI is listed before IDE Hard drive in the boot sequence, you should be all set.

by maxwell edison

Here are some links to articles related to configuring your SCSI devices and controller.

"Installing SCSI Devices Right the First Time"

http://www.pcworld.com/news/article.asp?aid=5786

SCSI World white papers on a variety of issues:

http://www.scsi.com/White.htm

Installing SCSI Devices:

http://www.verstand.co.uk/data/Library/scsi.htm

Installing SCSI Devices Right the First Time:

http://www.pcworld.com/news/article.asp?aid=5786

>>>REMOVE SPACES from the pasted URLs<<<
Maxwell

by yacco

If there is a setting in your bios for setting the pci trigger (the choices are level or edge) try changing the setting.

This discussion is closed to new replies.