8 replies
by thechas
Basically, the notebook is too old.
As you discovered, you need CardBus support for a PCMCIA USB card.
This is something that CANNOT be added by a BIOS upgrade. The chip-set and related hardware on the motherboard MUST support CardBus.
I have been looking for a non-CardBus PCMCIA card for a friend, and have had no luck.
Basically, your only option is a newer notebook.
Chas
by gwynnes1
Poster rated this answer.
by gwynnes1
by joseph moore
Look, the OS will only see the hardware that the system BIOS reports. That is how that works.
If the BIOS cannot work with USB devices, then you are not gonna get this to work.
It all starts with the BIOS. It fires up and makes presentable devices it can understand, so the OS will know what it can work with.
So, if your BIOS does NOT support USB, then your OS will not be able to work with it.
So, I agree with TheChas and his note that your PC is just too old to work with USB.
You can't get a 486 processor to work with USB, so just give it up!
by gwynnes1
Poster rated this answer.
by thechas
You are correct, I mis-read the CardBus statement.
I do not think that this is a BIOS issue.
The default drivers that come with W98 are very limited.
I believe what you need is drivers for the TI PCI to PCMCIA bridge chip.
Acer (they bought TI's notebook line) only offers drivers for Windows 3.11 and 95.
What you need to find, is a driver for the:
Texas Instruments Ti 1130 CardBus controller
I was not able to find a driver on TI's site.
A quick search found this MS Knowledge base article that may shed some light on the problem:
It looks like you are not alone in having problems getting cards to be properly recognized by this chip. My search turned up various postings about problems with the chip and getting cards to function.
Chas
by thechas
I looked around at the Cirrus Logic web site, and could not find any controller drivers.
There has been a lot of trading of product lines between the various chip manufactures.
I suggest that you take a look at the Texas Instrument driver listings at www.driverguide.com
Just use do caution if you decide to download a driver.
Chas
by csmith
It is hard to figure out from the information given if the problem lies with the PCMCIA Card or the OS.
Microsoft released an Update (Bug Fix) to fix the problems with USB under Win98.
I think it is still posted on the MS website.
Which brand of USB card did you try?
Even in desktops, the degree of sucess can vary with different USB card retrofits.
Regards, Chris
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending