8 replies
by overclocker
Something residual on your hard drive is conflicting your setup. Go to control panel / add/remove programs and click on the 'startup disk' tab. Make the startup disk. Open Explorer and copy FORMAT and FDISK to the floppy - they can be found in c:/windows/command. Shut down and reboot from the floppy. Choose the "CD support" boot option. From DOS, change to the CD-ROM drive (type x: then Enter - x is the drive designation). Then, type DIR and Enter. You should see the DIRectory of the CD in the CDR drive. There should be a file named INSTALL or SETUP - if you can't see all the files, type DIR /W then Enter. Type SETUP (or INSTALL) and hit Enter. This should work.
If not, you may have to reboot from that floppy and reformat yourhard drive. NOTE: this will wipe everything on your hard drive. So, back up your data first. To Reformat, boot from the floppy and type FORMAT C: then Enter. Let it do the format, then reboot from the floppy, change to the CD Drive (as before) and SETUP or INSTALL (as before).
by jeeper
by paul
Hi it seems that you are quite well with installing win 95/98. I have only one suggestion for you that you check your VGA card it's loose connected or not. Or you can remove the card and place that correctly.
Than try to install win95/98. Hope thiswill solve your problem.
by jeeper
by dmiles
by jeeper
by jeeper
by jeeper
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending