Discussion Locked

insufficient memory

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I had partition and formated the hard drive to install the windows 98, but each time when it re-boot, it gave the message [ Insufficient memory to initialize windows, quit one or more memory-resident program or remove unnecessary utilities fro your config.sys and Autoexec.bat fles and restart your computer]
Where I can find the memory-resident program ?

3 replies

by thechas

This sounds like the W98 large RAM bug.
There are known problems with Windows 98 and Me if you install more than 511MB of RAM.

Do you have more than 511MB of RAM installed?

If so, the "fix" is to remove RAM so you have less than 512MB.

I limit my W9X boxes to 384MB just to avoid the bug.

The problem is in the core Windows 9X code.
There is NO patch to correct the problem.

Other supported fixes:
Upgrade to Windows 2000 or XP.
Add a maxmem line to the system files to limit Windows to say 500MB of the installed RAM.

On benchmark tests, Windows 98 was found to actually run slower when more than 196MB of RAM was installed.

Chas

by painmed

Poster rated this answer.
Dear Chas, you are an excellent expert right on target. I had 3 512 MB ram, I just removed one of the 512 MB with the remaining of 1022. MB Ram. then re-installed the win98 it works. Thanks a lot. It is a wonderful feeling to crack the mystery.
I wish the TechRepulic will publish in a book contain all the questions/answer for reference.
Dr. Chu

This discussion is closed to new replies.