7 replies
by oz_media
What Pc ad graphics chipset are you referring to?
What Os etc.
It should be as simple as going into the Control Panel>System and in the hardware list, just right click and disable the graphics adapter.
I have two or three myself that have worked that way when I have upgraded cards.
by jamesrl
You might also have to go into the BIOS settings and disable the onboard card as well.
My HP forces me to first disable in control panel and then change the BIOS to recognize AGP video card.(Then install drivers).
James
by jamesrl
You might also have to go into the BIOS settings and disable the onboard card as well.
My HP forces me to first disable in control panel and then change the BIOS to recognize AGP video card.(Then install drivers).
James
by thechas
There are 3 ways that on board graphics systems get disabled.
Some (newer) automatically recognize when a plug-in graphics card is installed and disable the on-board graphics adapter.
Others require you to enter BIOS settings, and disable the on board adapter there.
The oldest systems require you to change jumper settings on the motherboard.
(A few systems require both BIOS and jumper settings.)
Look up your specific model at www.hp.com
There should be a FAQ for disabling the on board graphics.
Chas
by glyall
before disable the vidoe in the BIOS check the memory that is set aside the video.
Setting to the lowest setting. Then disable the video.
Any memory that was set aside for video you can not recover it. It is lost.
good Luck
by mayersjason
Poster rated this answer.
by mayersjason
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending