6 replies
Hi I guess you are using 2 monitors from different signal sources, what you see is the scan coils talking to each other, what you are seeing is the difference frequency between the 2 monitor vertical refresh rates. Steel or aluminium may help if this does not you may need MU metal which is probably expensive you would need to talk to a transformer manufacturer to get this material also you may need to ground the sheild.
Hope this helps
Rich
by grump
Yes lead is over kill.
Here is a quick try..
Take a piece of sheet tin bout 14 inches square.. stand it along side of one monitor..
fasten a ground wire to the sheet metal and the other end of the wire to the metal case of you computer, back out one of the screws holding the power supply in place..
With all the luck if your problem goes away the you can make what ever changes are necessary to beautify the jury rig.. Luck!
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending