Question Locked

Internal SSD detected, External SSD not detected; does this make sense?

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Howdy Techies, nice day to you!

I seated the enclosure, but it is not showing up

Internal SSD shows up

It doesn't make sense why the external enclosure does not show up

I dont understand why its doing this

All hardware in question is either mint or new

Sincerely,
The Director of Operations

4 replies

by kees_b

Please tell more.

An SSD when correctly installed in an enclosure and connected to a PC running Windows should show up in Disc Management. If it's formatted in FAT or NTFS is should even show in Explorer.

If it doesn't, it's one of:
- the SSD is defective
- it's not correctly installed
- the enclosure is defective
- the enclosure needs external power
- the cable is broken or not inserted correctly
- the USB-port is defective or disabled

It's up to you to find the culprit.

by oh smeg

That some USB Cases require 2 USB Plugs to be plugged in to provide the necessary power to run the drive so if the enclosure came with a data lead with 2 USB Plugs on it plug in both and the drive may work or if it's a 3.5 inch drive it needs it'sown power pack to supply enough power to run the drive. No matter which type of drive you have you should plug it directly into a USB Socket on the M'Board not USB Socket connected to a fly lead that is on the front of the case of way away from the M'Board.

by garloom26

Try using different cables or try a different port. I've had hardware issues where it was simply a bad port.

by DediRock edited

Check if the external SSD is properly seated or if there's an issue with the enclosure itself. Sometimes a faulty cable or port can cause this. Did you try connecting it directly without the enclosure to test?

This discussion is closed to new replies.