6 replies
by carquiza
Hi,
Would this be possible? I thought IRQ is for those Video Card or Sound Card along. Keyboard has his own port and mouse and even printer.
Tell me if an answer to these.
Cheers,
Mel Arquiza
Home Page Design
http://hpd.welcome.to
by holtthlt
by fenaikh
Hi
The devices trigger interrupts by signaling over lines provided on the system bus. The interrupts 0 (system timer), 1 (keyboard) , 2 (programmable interrupt controller (Cascade for IRQs 8 to 15)), 8 (System CMOS/real time clock) and 13 (Numeric data processor (math co-processor)).These are used internally by the system and never have wires (none Bus Line) on the system bus which make them unavailable to peripherals or user devices. All this came from old system bus ISA and sharing of any IRQ was hard for 2 devices to use the same IRQ except IRQ3 for COM2 and COM4 and IRQ4 for COM1 and COM3 ports where only one port could use it at a time. In the newer PCs PCI bus uses its own internal interrupt system for dealing with requests from the cards on the bus. These interrupts are often called "#A", "#B", "#C" and "#D" to avoid confusion with the normal numbered system IRQs, though they are sometimes called "#1" through "#4" as well. These interrupt levels are not generally seen by theuser except in the BIOS setup screen for PCI, where they can be used to control how PCI cards operate. On the other hand plug and play uses a feature called PCI steering "IRQ Holder for PCI Steering" and enables the IRQ used for PCI devices to be shared and controlled by the operating system to avoid resource problems. Having this listed in addition to another device under the IRQ list does not mean you have a resource conflict. IRQ12 is a good choice for use by devices such as network cards. Depending on your system BOIS and operating system you could IRQ.
I hope this helped you.
Good luck
Mohamed
by fenaikh
Depending on your system BOIS and operating system IRQ are set.
If your are using win98/se/me OS
Start->Programs->Accessories->System Tools->System Information-in the left pane click the
+ to the left of hardware Resources then select IRQ to see the OS setting for IRQ in the right pane.
by holtthlt
by holtthlt
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending