Discussion Locked

IRQs & SCSI

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a Adaptec ava-2906 scsi card (set on irq 9) that has the little yellow exclamation mark next to it in device manager. I reinstalled the current version of the driver several time. I wanted to change it's irq (irq 9 is linked to 2, so shouldn't it not be used by the scsi card?) to see if that is the problem. I went into device manager, properties off the scsi card, resources tab to get to the irq #. It wouldn't let me change it there.
Is there somewhere else I can bump it off 9 or setit somewhere else (11 or 15)? Thanks

7 replies

by liquidcoolit

In Your BIOS you can manually assign IRQ 9 to a "legacy" device and not a PnP device. Try doing that. Otherwise change the slot that it is currently in. Sometimes some PCI slots prefer using certain IRQ's. Another slot might default to another one.
Cheers ....

by freetech

try going to device mgr and just "removing" it. it will ask if you are sure and just say yes and reboot.
if that doesn't work, then move it to another slot.
if that doesn't work, tell the bios that you have a ps/2 mouse, or enable that feature inthe bios, that will reserve the irq 9 for the ps/2 mouse.
if the above don't work, then major bios/board tweaking will be necessary.
try those things first.

by asjwm2

Sometimes the OS won't detect a SCSI card unless there is a device plugged into it. Take the card out; see if it has little jumper connectors, little black squares that jump 2 pins. Look for 2 rows of pins about 8 long with a jumper on it. One setis the IRQ, and the other is IDE or PCI. You may be able to manually change the jumper setting to a different IRQ; look at the manual. Change the jumper, plug in a device, then reboot and see if Windows will detect it.

This discussion is closed to new replies.