8 replies
by bfilmfan
What is the speed of the IO card?
That will be the determining factor over drive speed.
by nz_justice
May be this would help you decide.
Below is an extract taken from the following link.
http://www.experts-exchange.com/Storage/Q_21330145.html
"Right now if you use a SATA II controller will really only see a improvement between the controller and the rest of the system with first generation SATA drives. The controller can only talk at the speed of the drive but if you have multiple drives the SATA II controller will be able to transfer from all drives to the system at a higher rate than a SATA controller.
Here is an example from Addonics where they claim a 200 MB/s transfer with 4 SATA 7200 RPM drives in RAID 0,
http://www.addonics.com/products/host_controller/adsa3gx4r.asp
If you used SATA II drives the overall performance would be a step better than comparable 7200 RPM SATA drives. In theory you would be able to max out the transfer from the controller to the system. The Raptor may be close to doing that as well with 4 drives.
By comparing the specs on the Hitachi drives vs the Raptor I would expect the Raptor would still outperform the Hitachi drives SATA II interface or not. The Hitachi drive specs other than the SATAII interface are the same as its PATA sister drive for sustatain transfer and seek times. The sustained transfer of the Raptor specs at 72 MB/s vs Hitachi peaks at 61MB/s, also the Raptor has superior seek and latency times.
Hard drives still face physical limits for the mechanical portion of the drive. Improving the interface can help (features like NCQ) but the underlying mechanics are still the same. Changing the drives RPM speed changes those mechanics directly and translates to the gains you see with a Raptor.
Hitachi Specs,
http://www.hitachigst.com/tech/techlib.nsf/techdocs/5AB985BA152021C686256CE800718F09/$file/Deskstar_7K80_v9.pdf
WD Raptor Specs,
http://www.wdc.com/en/products/Products.asp?DriveID=40
The Hitachi would be quieter than the Raptors.
SATA is slated to hit 6GB/s in 2006 and hopef
by nz_justice
by tekrat
by hal 9000
Well as I don't know the exact hardware in this case there is a general rule of thumb to look at and remember.
The more on board Cache that the HDD has the faster it will appear to operate, so instead of looking at Rotational Speeds look at the actual Cache on the different HDDs and go with the ones with the most Cache.
Col
by wlbowers
10,000 SATA. 150 MB per seconds.
Just because the drive to computer buss has doubled doesn't mean the drive have kept up.
The 10K drives will crap all over the 7,200.
Lee
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending