5 replies
by ars0990 Accepted solution
by older mycroft Accepted solution
It rather depends on which laptop you've got.
Most (but not all) laptops tend to come with a Restore Partition which is invoked at Power-On, before the OS has a chance to load. It will then reinstall the OS to the state it was in when the laptop was put into a box to be shipped out of the factory.
The remainder of laptops (the 'but not all' ones) would've come with a set of System Restore Discs, which would be used to achieve the same goal.
by ars0990 Accepted solution
by older mycroft Accepted solution
So you wouldn't normally be able to see it.
It is usually kick-started by using a specific key combination. For example on ACER laptops, the restore partition is invoked by pressing [b][u]Alt+F9[/b][/u] immediately after powering on (even before the splash screen appears) which takes the system into a Ghost screen for reinstallation of the factory image.
What the key combination would be for the DV6000 I don't know but some other Peer probably does (if it HAS a restore partition, that is).
It should be in the Owner's Manual.
**According to Google, the DV6000 Restore Partition is activated by hitting [b][u]F11[/b][/u].
[i]Edited for **[/i]
by robo_dev Accepted solution
on many HP PCs you hold/tap on F11 on bootup and the PC should boot into the recovery partition which then allows you to 'factory default' your PC.
Note that this wipes out everything, so triple check to make sure you have all your data as well as install disks, license keys for applications, etc.
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending