Discussion Locked

Joystick will not calibrate on Y-axis

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am unable to get my joystick to calibrate properly on the Y-axis. I originally thought is was the joystick, since it was rather old. However, I recently purchased a new one (a Gravis BlackHawk), and am having the same problem. If I let the joystick center it behaves as though I had it pushed full forward. Any ideas why...and how to fix it?

3 replies

by johnny51

Daniel - Sounds either like the sound card (joystick port) is defective or the drivers for the sound card are functioning properly. Working back from the joystick, you verified that the stick itself wasn't the problem. What I would do is reinstallthe drivers for the sound card and if that doesn;t resolve the issue, see if you can try the card in another PC. These are probably the only two possibilities left unless you use some sort a joystick extension cabel which might be bad...good luck!

by txitguy

Well, I still haven't got the problem resolved, I tried your ideas, and even had the entire system checked by a technician (who installed manufacturer's driver's for my game port...I didn't even know there were any, was using Windoze drivers). I don't understand how two joysticks by different vendor's could have the exact same problem, but the system was given a clean bill of health.
I'm down to buying a better joystick unless you can think of something the tech might have missed. Either way, you provided some help, so I'll give you the points and a 'E' for effort. Thanks.
If, after getting a new joystick (looking at the SideWinder 2), I still can't get it to work, I'll be opening another question...I think I'll use: "Frustrating joystick failure, please help" as the subject, though "Aauggghh, system fine and it STILL won't work" would be tempting if it wasn't so imprecise and too long. :)

This discussion is closed to new replies.