Discussion Locked

laptop dvd cdrw interface connection

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a dell latitude that uses an external cd rom. I purchased a dvd/cdrw to use in the external bay. Apparently the connection is the wrong type. Laptops are new to me so I don't know what connection it takes. Is there another cable I can buy to be able to use this in the external case?

2 replies

by hal 9000

Probably not.

What you'll need is a DVDRW with the same type of connector as the old CD ROM or another external case that connects to the NB through a USB or Fire wire cable depending on your current connection and available ports. If you have a Fire wire Port it will be faster but if not a USB will do the job quite nicely.

Col

by electricdragon

Hi-
Going to link you to an ebay auction, its not mine so I'm not trying to sell you anything OK? I live in the USA and its in the UK, but it has a nice pic of what I think you need, I had to buy one sometime back for the same reason.
If the connectors are not right, browse the catagory, they are available in M-M M-F F-F etc.
Unless the connector you have is proprietary you should be able to get what you need.
Laptop IDE has the same pinout, but a smaller connector.
eBay auction:
http://cgi.ebay.com/Notebook-Hard-Disk-Adapter-2-5-Laptop-to-3-5-IDE-Drive_W0QQitemZ6853961091QQcategoryZ31567QQrdZ1QQcmdZViewItem

HTH
ED

This discussion is closed to new replies.