Laptop Hard Drive
How can take off the circuit board off 2.5" HD.
I can take off Metal Plate with T5 Torx. But i cannot take off Circuit Board with T4,T5.
Looks Like its + type of screw.
If you know where to purchase this tool. please let know
Hardware
How can take off the circuit board off 2.5" HD.
I can take off Metal Plate with T5 Torx. But i cannot take off Circuit Board with T4,T5.
Looks Like its + type of screw.
If you know where to purchase this tool. please let know
by mesuito12 Accepted solution
by skdtech Accepted solution
by oh smeg Accepted solution
They are Jewelers Screwdrivers and if there is a Cross Slot in the screw it is a Phillips. These small Screws can not be a Posidrive which looks similar to a Phillips Screw but have a slightly different cut out inside the screw for better driving/location of the Screwdriver.
I also agree with the above if you are planning to use this for display there will be no problems but if you think you can repair it you are sadly mistaken as any dust or grit that enters the drive will destroy it when you apply power next time. You need to work on these in a Class 1 Clean Room or a Lama Flow Cabinet to prevent anything getting inside the drive. ;)
Col
This discussion is closed to new replies.
Sort by Trending