Discussion Locked
0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a Hewlett Packard Laser Jet 4L. The printed pages are lighter colored on the left hand side than the right, that it the fading is from right to left. Is this a fuser problem?
8 replies
by ann777
Generally not. Generally the fuser just heats the particles applied to the paper and melts it into the paper.
Your problem is probably caused by a mialigned toner roller or low toner on one side of the drum. I suggest you try another toner cartridge first (or shake the first (one right to left) and test print, then try a new one if that does not help).
by ann777
that was supposed to be a "mis-aligned" toner roller
by dummy_name
The question was auto-closed by TechRepublic
by hinrgman
Remove the toner cartridge and gently shake it. If this cures the problem it is time for a new toner cartridge.
by dummy_name
The question was auto-closed by TechRepublic
by mski
If the above suggestions fail, make sure the transfer roller (thin black sponge roller) that sits just below the toner is clean and seated properly (just give it a little push down to make sure).
by dummy_name
The question was auto-closed by TechRepublic
by dummy_name
This question was auto closed due to inactivity
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending
Question Locked
Setting up a wifi bridge with switch correctly
0 helpful
5 replies
Question Locked
Experiencing Bottleneck with RTX 4060 + i5-12400F - Need Advice
0 helpful
5 replies
Question Locked
Keyboard
0 helpful
3 replies
Question Locked
Core i7 12700KF or Core i7 12700F ?
0 helpful
9 replies
Question Locked
Looking for honest opinions on gaming PC
0 helpful
5 replies