Discussion Locked
0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Help!! My HP Laserjet 4MPlus is printing a fat vertical line on the left side of paper. It is not a toner problem. Thanks for any help.
6 replies
by fidgetgames
quick check list,
drum unit,
tone, () which is ok from what yuou have said
fuser,
paper path.
Most bad print quality problems come from the drum unit being damaged, marked or generally defective.
by fantsea
Poster rated this answer
by cvjack
Will it run the self-test? Check the manual to see how to get it to run the self test. If that prints up okay, then the problem may be a loose data cable connection, or the laser printer simply has a bad communications board. Check the cables and make sure they're all tight. If you're using an A/B switch, take it out and connect the printer directly to the computer. If that doesn't help, it sounds like you need to take it to a service center. One more thing to try, connect it to a different computer and see if it works from there. You never know, the parallel port on your system could be bad - not likely though. Good luck
by fantsea
Poster rated this answer
by fantsea
This question was closed by the author
by fantsea
Thanks for your help guys-- got it fixed. It was the toner cartridge after all. Both were messed up.
Have a good one!!
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending
Question Locked
Setting up a wifi bridge with switch correctly
0 helpful
5 replies
Question Locked
Experiencing Bottleneck with RTX 4060 + i5-12400F - Need Advice
0 helpful
5 replies
Question Locked
Keyboard
0 helpful
3 replies
Question Locked
Core i7 12700KF or Core i7 12700F ?
0 helpful
9 replies
Question Locked
Looking for honest opinions on gaming PC
0 helpful
5 replies