Discussion Locked

Laserjet 8550 color calibration

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a 8550 printer that has a problem with the cyan (blue) printing slightly to the left of the other colors. It makes the image blur and adds a blue line to the left side of the image. I can find any information on what could be causing this on any other sites, so I thought someone here may have ran into this. I have tried change the toner cart.

7 replies

by jayeliz

Havn't run in to this problem before but, printer seems fairly new and Hp technical support should be able to help.

HP Support
1-800-633-3600

Hope this helps

by w2ktechman

You need to reset the carousel. This is a task and a half. I helped replace one once, expect lots of time, because to recalibrate it, the printer will come almost all the way apart. It might be better to hire a printer repair service or have HP technician fix it.

by kc 1

Try doing some printer maintenance, by first cleaning the print head through the HP software, then align the printhead, again through the HP software....

by kc 1

Try doing some printer maintenance, by first cleaning the print head through the HP software, then align the printhead, again through the HP software....

by kc 1

Try doing some printer maintenance, by first cleaning the print head through the HP software, then align the printhead, again through the HP software....

This discussion is closed to new replies.