4 replies
by ozi eagle
Hi,
I don't know about the printing problem, but the multiple page problem is caused by the rubber on the paper feed thingummy being worn, and needs to be replaced.
I've had several 1100 printers do this and replacing them fixed it. Note these parts are the same as canon parts.
by rcom
You probably have a driver issue and a print is in the cue that is still going. If the wrong driver is used the printout may be very strange. So make sure there;s nothing in the cue. One thing would be to uninstall the printer driver and start over.
The pulling of multiple pages is caused by a worn seperation pad. If you look down in where the paper stands in the back you'll see the spring loaded pad. If the pad is just dusty, you can possibly get a bit more usage from it by cleaning with a Q-tip dampened with plain water.
It can be ordered from fixyourownprinter.com if you get the kit it will come with full instructions to perform the repair.
Don't use the so called free fix offered by HP because they just give you another strip to glue over the original. These often peel off and end up in the fuser or somewhere else. Causing the need for more repairs.
by rcom
by nawruz_ong
Have you tried downloading and reinstalling it with fresh copy of drivers? http://welcome.hp.com/country/us/en/support.html
You can also try changing between the PCL or PS drivers (if hey have it for this model) and see if it solves your printing problems. PCL is usually recommended though. PS drivers have some issues sometimes.
Hope that helps.
HP - SRA Print Admin
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending