Question Locked

Latitude C400

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
How can I install windows onto a Dell Latitude C400 laptop. It has no cd drive. I tried installing windows on a different laptop and then reinstall HDD in the C400 but upon startup it hits blue screen and reboots. Any help in this regard would be much appreciated.

11 replies

by dougvasey

Thanks, but this is an older P3 Dell. It doesn't have boot USB device.

by tmalo627

Short of actually installing a CD drive in the machine, that would be the other option I would check. Copy the i386 folder to another computer on the network and share it and see if you can boot from your NIC.

by tmalo627

If it has a floppy drive on it, you can copy the i386 folder to a flash drive and use floppy disks to boot to your installation environment. From there it can actually copy the set up files from the flash drive.

by dougvasey

There's no way for a cd drive. This is sort of a mini laptop no place for any drives. Can I set up a crossover cable on this without an operating system installed?

by tmalo627

BIOS and your NIC have to be capable of booting in a Pre-eXecutable Environment (hence PXE). If there is an option for your network card in your boot options then we've got something to work with. I would just plug a straight cable into your router at that point though. The PXE will pick up an IP address from the DHCP server.

by dougvasey

Don't have a floppy drive. But have PXE Network setup to boot but it can't make the network DHCP conection.

by tmalo627

I have not had a need to use the PXE boot method before, so my personal experience with it is limited to theory and lab testing done over a year ago. But you can find more info about it here.

http://support.microsoft.com/kb/257579

Hope this helps.

by rob miners

Download DOS7

http://ms-dos7.hit.bg/#msfv

Burn it to CD using Nero or similar.

Remove the drive from the Notebook. Ensure that you have an Active Partition on the Drive and it is formatted FAT32.
Connect the Hard Drive to the PC that you have been using. Set it to Boot from CD in the BIOS. Connect your Notebook HD and turn on the PC. Insert the DOS CD that you created and follow the prompts to install it to the Notebook Drive. When you have finished installing DOS, you will need to copy the entire I386 folder from your XP CD to the USB HD. While you are copying the I386 folder also copy your Antivirus Sofware that you are going to install along with the Motherboard Drivers. You will find the Motherboard drivers on the Notebook manufacturers site. When you have finished doing that, connect the HD to the Notebook. Turn on the Notebook and you should end up with a DOS Prompt. Type in CD I386 and press enter. Type winnt.exe and press enter.

This discussion is closed to new replies.