Discussion Locked

Life of UPS

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I need to find out how i can test the life of a live UPS (connected to servers) and how to test redundent spare UPS. ok i know there are different makes/modles, most of the ones I am using are APC and of course varing modules. does anybody know where I can find this info. and what is a good method of testing. How long they last with out mains. Look in the manuals i would but, like many IT Deps the manuals ane lost in the IT abyss.

Many thanks

Tommy

5 replies

by shiny_topadm

Hi, as you know there are many variables to how long a ups will support systems. There are technical specs, manuals, and papers on the subject at www.apcc.com and I reccommend you check them out, even if you have some non-APC hardware. To estimateyour current draw (and then the battery life) you need to know the details of the hardware you're supporting, so it's a good idea to start with that data first. Good luck...

Will

by timwalsh

Every environment will be different. Therefore all you will get out of any documentation will be ball-park figures based on an average power draw for a specific UPS. The real life span (up-time) of a specific UPS is based mainly power draw of the equipment connected. You can get an approximation by adding up the peak power draw (usually found on the UL tag found near the power supply) of individual pieces of equipment. This should give you something close to a "maximum worse-case" figure.
In order to get an accurate assesment of your specific situation, you will need to run a physical test of each UPS (disconnect the power and see how long it takes for the UPS to die). Obviously, you will need to do this at a time when normal operations won't be impacted. The down side is the power load during off-peak times will still be somewhat different than what you would experience during normal operations

This discussion is closed to new replies.