Discussion Locked

Looking for a fast motherboard

0 helpful
15 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

With all the different motherboards out there how do you determine which is best? I looking to build a new computer with AMD 1800+ or better in mind. Intended use will be for a Cad workstation. I have an idea what the other components will be. I've use Intel product up til now. This will be the first AMD computer. I looking for dependabily in craftsmanship, ease of installation of other components and compatabilty. As I mentioned earler I not familar with what is available for AMD cpu's.I would like at least 3 or more recomendations if possible. Thanks for your help.

Matt

15 replies

by b_pope

From MSI try K7T266 PRO2
From ASUS try A7V266-E
From ABIT try just about any of them KR7A-133 or KG7.

All 3 of these MB makers have a whole line up of AMD boards, you can't really go wrong with any of them, make sure you use thermal paste when you seat your CPU & get a good cooler also. If you browse through the site below you can get some good ideas for cooling.

http://www.amdmb.com/index.php
http://www.coolerguys.com/

by roamingtexan

The information I've been reading about these boards classifies as excelent choises. However with the new VIA chipsets and new DDR333 chips, I think I'll wait a little longer before I go buy anything. Thanks for the information it help me have a good start in my research.

by thechas

Since speed is your goal, here are key features to look for;
266MHz minimum front side bus
ATA133 support for IDE
DDR ram speed

There are at least 3 different speed ratings for DDR ram. Make sure your MB supports at least the fastest you are willing to pay for.

A friend of mine who is into over-clocking loves Epox motherboards as they are the easiest to set up for overclock modes.

My top 2 mfg are Abit and ASUS
Next tier are Epox, Shuttle

by roamingtexan

Even though over-clocking is compelling I'll wait until I have a spare computer lying around to trash and experiment.

by dcosgrove

Just built three cad machine for an engineering firm in new york. Used ASUS P4B266, Pentium 4 board with DDR support. They work great using 256 megs of DDR memory. Lots of extras on MB also. More USB capabilities than youl likely ever need and more. Happy hunting. I am a little opposed to AMDs new naming scheem for it's chips. This is the second time in there history that they are using misleading advertisement to sell product. I also believe they will always have thermal and stability issues. Even the T-birds which I have used often will overheat if the heatsink is not installed perfectly.

by the_ripper

I own a computer shop and i know that the best rated board on the market today is the
SOLTEK SL-75DRV/-X DDR
with the redstorm overclocking utility built into the bios it runs the 1800+ at clock speeds of 1700Mhz this meens your 1800 will be faster than a 2000+ on any of the above mentioned boards saving lots of cash 1 step ahead of the rest

by the_ripper

WARNING

Do not use thermal paste this does not work with AMD anthlon CPU.
The reason is expansion the alloy on the heatsink expands thus pushing out the paste after a period of time the paste becomes none existent in the centre of the cpu and it overheats this is what causes all the crashes with amd cpu s Use a Heatsink with a thermal Pad The paste thing has cost the world a fortune dont let it cost you aswell and the guy who answered first read the amd site

by the_ripper

and whats more simple than pressing a button which says would you like to overclock your computer Soltek board finds thew most stable CPU speed then restarts the computer at its new clock speed and thats it

by shanghai sam

There are many good mobos to choose from. Three good brands are: MSI, Asus, Abit. There are others as well. Most of the different models within a brand reflect different chipsets and features. Pick the features that you want but go with a KT266a chipset. (Yes there is a newer chipset out- KT333 but PC2700 ram is not even a real spec yet, and I never recommend version 1.0 of anything!)
You said you would use this machine for a cad workstation. I don't suggest overclocking or running anything out of spec on a work machine. That's for a hobby machine.
As for thermal compound between the heatsink and cpu I reccomend Artic Silver. Contrary to other comments, I would state that thermal compound is used only to bridge minor irregularities on the mating surfaces to acheive maximum contact area not used as some sort of lamenent between the two that can squeeze out. Cheap compound may not adhere well and may liquify when heated making it not suitable to task. Many tests have shown Artic Silver to be superior to thermal pads. I'm running an XP1900+ on an MSI board and like it a lot. I'm sure you will like your new one too.

by roamingtexan

I'll check out the Artic Silver, thanks for the information. I'm one that will risk at "1.0" not because I want to be the first on block with one. But rather postone having to go through another upgrade sooner than I have too.

This discussion is closed to new replies.