Discussion Locked
0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I just got a LPT Cd-RW today and no matter what I did with drivers or settings, there would be conflicts with all of my USB hardware. I had the same problem with my old printer that I used to have on it. For example, with the burner, my Intellimouse explorer would freeze up for several seconds, then cut back in for a bit, then freeze again. The CD burner works fine, just having USB problems. Any suggestions on what I should do?
5 replies
by nccmbc
LPT? you mean an external CD-RW using a parallel connection?
USB and parallel ports have nothing in common. Even so, go into system and check for conflicts or shared IO ports, you may have to play around with changing a few settings. Going through my notes, if there are no conflicts or driver problems than the freeze could be the simple fact that your CPU can't keep up with demand placed on your system. But I'm not working with very much information and just speculating.
Poster rated this answer
by kth11
Sounds to me like you are experiencing conflicting vxd's. I work in cdrw support and have seen this many times. Strongly recommend calling the manufacturer of your drive and tell them that you need to rename vxd files to get rid of conflicting virtual drivers. If it is HP you may even get to talk with little ol me!
Poster rated this answer
This question was closed by the author
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending
Question Locked
Setting up a wifi bridge with switch correctly
0 helpful
5 replies
Question Locked
Experiencing Bottleneck with RTX 4060 + i5-12400F - Need Advice
0 helpful
5 replies
Question Locked
Keyboard
0 helpful
3 replies
Question Locked
Core i7 12700KF or Core i7 12700F ?
0 helpful
9 replies
Question Locked
Looking for honest opinions on gaming PC
0 helpful
5 replies