Discussion Locked

MAINBOARD DETAILS

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
HOW CAN I FIND THE DETIALS OF MAIN BOARD E.G. HOW MUCH VOLTAGE IT GIVES OUT TO USB OR SERIAL PORT? ON HOW MUCH AMPERE AND FREQUENCY IT WORKS PLS HELP ME FOR THIS DETAILS.

7 replies

by riverfreight

It used to be that the board manufacturers name was on every board, failing that every chip used to have a serial number and the manufacturers name and all that you ask could be gotten thru them and I think the Information, in the USA anyway, is free.

RIVER FREIGHT

by riverfreight

It used to be that the board manufacturers name was on every board, failing that every chip used to have a serial number and the manufacturers name and all that you ask could be gotten thru them and I think the Information, in the USA anyway, is free.

RIVER FREIGHT

by thechas

I don't believe that I have ever seen any motherboard provide details beyond the port type and specification that the port meets.

If the motherboard manufacture has excellent technical support, you might be able to get a reply from their tech support link.

To identify who made a motherboard, use the ID tools posted at either www.motherboards.org
or www.wimsbios.com
If the motherboard is in a name brand system, it is an OEM board, and ALL support is handled by the system manufacture.

As far as the ports go, the voltages and frequencies are governed by the industry specifications for the port.

For links to USB specifications, check out www.usb.org

The serial port specification is RS-232.
You should be able to find the actual specification in the IEEE archives.

The amperage available on the 5 volt power lines on any given motherboard need only be enough to power 1 device in order to meet the specification.

If you are having problems with multiple USB devices, a simple solution is to add a powered USB hub to your PC.

The RS-232 serial communication standard never envisioned devices with a low enough current draw to be powered by the port. The 5 volt line on the serial port is meant to be a reference, or toprovide limited power to drive an isolated output from the connected device.

Chas

This discussion is closed to new replies.