As stated, the "best" way to share a scanner is to setup a dedicated scanning station that is accessible to all users.
Sharing a scanner physically between multiple PCs is VERY problematic.
If the scanner connects with a USB port, AND the users are close enough to each other, you could install a USB switch.
This is NOT the same as a USB hub.
With the switch, the users could switch the scanner between PCs.
You will need to arrange the office so that the longest path between any user and the scanner is less than
"In practice, the USB specification limits the length of a cable between full speed devices to 5 meters (a little under 16 feet 5 inches). For a low speed device the limit is 3 meters (9 feet 10 inches)."
(from the FAQ section at www.usb.org)
You can increase the length to a maximum of 30 meters with several powered USB hubs installed in the line.
For a SCSI based scanner, you are pretty much limited to a single PC.
Or, physically moving the scanner.
Parallel port scanners present a challenge.
Typically, you need to use the short parallel cable that comes with the scanner.
You may be able to use a HIGH quality manual switch with high quality IEEE printer cables of 6 feet or less.
Chas