Discussion Locked

ME Bios upgrade on XP home

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Can I load the ME Bios upgrade on XP home upgrade?

I was trying to upgrade the RAM to 512 on my HP Pavilion. It will not see the 2 new cards together. Can't think of any other solution than bios upgrade or start over $$$.

8 replies

by thechas

I assume that the HP system came with Windows Me installed on it.

Most BIOS updates run from a bootable floppy disk that you create after downloading the update. So, yes, you should be able to update your BIOS with XP on your system.

Check the list of items corrected in the new version. It is VERY possible that the RAM limitation on your system is in hardware and a BIOS update will not allow you to install more RAM.

Make sure that the BIOS you download is the correct BIOS for your specific PC.

Follow all steps and precautions in the flash procedure.

Chas

by thechas

Ah,

The BIOS sees both RAM modules, but you can't boot.

Sounds like HAL9000 is correct that you have incompatible RAM modules.

Or, HP tech support is correct in telling you that you have a 400MB RAM limit.

Here is how they are coming up with the 400MB limit.

OEM computers like HP, Compaq and Dell may have multiple component suppliers. Each production run of a specific model of PC is built with the parts that were the least expensive when orders were placed.

For your specific model of HP PC, there could be several different motherboards that were used at different times in the manufacturing life cycle.

The published information is for the most common configuration of each model.

Now, with only 2 DIMM sockets, you can't get to 400MB. So, your option would be to install 1 256MB DIMM and 1 128MB DIMM for 384MB of system RAM.

One thing you can try, is to enter BIOS setup at boot, and dedicate 128MB to the on-board display adapter.

Chas

by thechas

Got your message.

I just assume from the HP brand that this PC uses on-board video. If so, you might be able to reduce system RAM by allocating more RAM to the video system.

HP manuals are pretty sparse in BIOS settings details.

If your system is one of the few that uses an actual video card, there will not be an option to set the amount of memory for the video system.

As to new systems, my first recommendation is to check out a local independent PC shop.

My second suggestion is this site:
http://www.buyxg.com/

I have not purchased a system from them myself. However, the people I know who have purchased from them are happy.

The option I use, is to build up my own.

Chas

by hal 9000

Rather that a BIOS problem I think you have a hardware problem here with incompatible RAM. But what you'll have to look at is the upper limit of map able RAM that can be added and the type. You'll need to keep the type and speed the same as the existing RAM or you will have problems.

Chas is perfectly correct with almost every BIOS upgrade you do this in DOS with a Boot Disk and then change floppies to the BIOS Flash Program and Upgrade file. Of course if you do not have a Floppy you will have to create a Boot able CD ROM to do the same thing and you'll be able to add the required files to that. The M'Board Book or in this case the system manual should explain just how to Flash the BIOS.

by hal 9000

Did the HP Techs say that you could only use 400 MEG of RAM or that the M'Board would only run 400 MEG of RAM for the OS?

The 400 MEG is a strange figure as it is unachievable in any RAM configuration so it sounds as if the M'Board can accept 512 MEG but it will only allow 400 to be available to the OS so the rest should be allocated to the On Board Video. This is generally set in 32 MEG increments in the BIOS but because HP use so many different M'Boards you really have to look at the book that came with the system or read the BIOS String and go to the makers Web Site like Phoenix, AMI or whoever and then from the BIOS string find out the make and model of the M'Board. The maker should have a On Line manual available which should go into far better detail than the generic one that was supplied with the system by HP. But do not be tempted to use the Makers Latest BIOS Update as quite likely while it is a standard production unit HP got special order modifications for themselves so any BIOS update from the maker will render the M'Board unusable.

by prf1164

512 Ram is the max allowed for this pc. Yes ME is the OEM with it. The Bios does see the 2 - 256 RAM cards, but the pc will not boot even into safe mode. The cards have the reguired specs approved by HP. After hrs online with hp tech...they slipped in that my pc may only be upgraded to 400 Ram. Where is that in writing, all i see is 512.

by dmiles

The bios configuration is not based on operating system,rather the type motherboard and the bios manufacturer,to which is located in the upper left corner.See the manufacturer for bios update

Check the memory modules to insure they are the same type and speed,install one module at a time or switch the modules to see what works.
It may not be listed,so check the HP site with model to find out about max. memory for your system
Check the BIOS setup and see if the memory is registering or to enable the memory setting

This discussion is closed to new replies.