Discussion Locked

memory replacement in w2k server

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Can you use a pc 133 memory card on a mother bd that has pc 100.. Im not sure what is in pc now.. thanls

10 replies

by the scruffy1

oh yeah, if the M/B can run pc133 it will run at full speed but if the M/B is only able to run pc100 the new stick will only run at 100 but no harm will be done.

by dmiles

Yes the PC133 is backward compatible
When installing use PC133 in bank 0 and the the PC100 in the last banks
Uninstall the memory and look at memory serial number it should have the memory type on the chip

by csmith

Ans. #2 has it backward.
The slower memory has to be in Bank 0,
(The first bank.) because some BIOSs only detect speed off of the first bank.
The PC's memory system bus can only run as fast as the slowest memory, so if you mix 100 and 133, the bus can only run at 100, and remain stable.
If you can, consolidate the 100 memory in one PC, and run only 133 in the other. That way you can take advantage of the 133.
Regards, Chris

This discussion is closed to new replies.