Hardware

Ask something
Discussion Locked

Memory required on Cisco 2600 for IPSec

0 helpful
5 replies

by techpoint_um

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a Cisco 26xx router with 32K NVRam and 8Mb flash. IOS 12.0
I need to install IP/Plus, IPSec to enable a VPN connection from my office to a remote office.
Do I need to install additional memory or is my configuration sufficient.

5 replies

by ebob

According to the Cisco CCO website, you need 20MB DRAM (NVRAM) and 8MB flash for this configuration. So you should be OK.

by ebob

I was hasty - I missed your requirement for IP/Plus also. This boosts your NVRam needs to 32MB. So you're just breaking even.

Personally, I always like to exceed the mfgrs' "minimal" requirements, and suggest that you try to upgrade.

This discussion is closed to new replies.