Min Processor speed for Max burn speed?
If I want to fit a 50+ speed burner and a reader, what is the minimum processor speed required?
I have access to a 200MHz AMD and need to know if I can burn at high speed.
Hardware
If I want to fit a 50+ speed burner and a reader, what is the minimum processor speed required?
I have access to a 200MHz AMD and need to know if I can burn at high speed.
by guruofdos
Processor speed is not the only factor. Bus speed, whether you have a UDMA66/100/133 hard drive and how much RAM is installed are all important factors. You will be fine with an AMD200 if you have a good UDMA compatible mobo and the IDE Drivers support UDMA and bus mastering. Do NOT run ANY background processes, not even a screensaver or virus scanner. Have at least 128Mb of RAM and at least 800Mb of free hard drive space. Always burn an image file to the hard disk first and then burn the imageto the CD using the best quality branded disks you can afford. DO NOT USE SPINDLED BULK DISKS under ANY circumstances!!!! Make sure the CD burner is BURP (Buffer Under-Run Proof) compatible and supports JustLink technology.
I have a 48x CDRW on both a P133 with 128Mb of RAM running 98SE and an AMD1800XP with 1024Mb of RAM also running 98SE. There is NO difference in burn quality on either system, but the XP is about 10% faster because it has UDMA133 hard disk instead of UDMA66. In actual fact, audio CD's sound a fraction better when burned on the P133!
by pqi
by thechas
You need to look at the minimum processor required to run your chosen CD burning software.
I believe for Easy CD Creator 5, that the minimum CPU speed is 350MHz.
The problem with older software that will work with slower CPUs, is that they maynot support your new, high speed, drive.
Another BIG factor in maximum CD burn speeds is the type of burning you will be doing, and the way the drives are connected.
For maximum burn speed, the CD-RW drive needs to be on a different IDE channel than the source drive.
If you desire to copy CDs, the CD drive and CD-RW drive need to be on different IDE cables.
If you will mostly be transferring files from your hard drive, again, the CD-RW drive needs to be on a different IDE cable.
Chas
by pqi
by pqi
This discussion is closed to new replies.
Sort by Trending