Discussion Locked

Missing DLL file

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
My Gateway computer suddenly displays a message upon boot up that a required DLL file is missing. At the same time my cd drive is no longer working. I have reinstalled the drivers for my cd and even tried to install a new cd drive but still no luck.Is this missing DLL file to blame and where can I find it to install back onto my system?

6 replies

by syscokid

Because that URL wrapped around the line, there will be a space in it after you paste it in your browser, probably between ...1106? and OpenDoc...

Make sure to delete it before you hit enter.

by the gardener

there shouldnt be any corelation between a missing DLLibrary file and the cd player not working.
depending on what OS your running, check the device manager for disk drive operation, delete it from there (it will reinstall upon reboot check the bios that all the ide's are set to auto)and also check within the autoexec.bat + config.sys files to see if there is any conflict with 2 drivers loading for the drive aswell, you can just rem them out (type rem with a space following it in front of theline)
if your OS is win98 or newer you can rename the autoexec and config file extentions because theyre not needed since everything is allready written within the registry, but if you need to use that drive within dos (not a dos shell) the driver will have to load from the autoexec.bat file, and unless its anything other than a cd player the generic atapi driver is enough.
www.upgradingandrepairingpcs.com

This discussion is closed to new replies.