Discussion Locked

Modem

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
what does the letter "Z" stand for in a modem string?

5 replies

by dmiles

ATZ-Reset the modem to its power-up settings,which may include modifications made by you or the customer

Z-Reset the modem to default settings

AT-Precedes all modem action commands

by fenaikh

Hi

You can store the phone number in the nonvolatile RAM with the &Zn=x command. The n refers to which of the four (0-3) memory locations you want, and the x is the phone number. To store the phone number 876-5555 as the 3rd stored number, type the following command:

AT&Z3 = 8765555

Z (Reset)
Hangs up the telephone line, clears the modem and the serial port buffers, and restores any settings stored with the &W or *W commands. If no settings are stored, the command restores the factory default (&F) settings.

&Zn=L Write the last dialed number to NVRAM at position n (n = 0, 1, 2, or 3).
&Zn=s Write the following dial string (s) to NVRAM at position n (n = 0, 1, 2, or 3).
&Zn? Display the phone numberstored in NVRAM at position n (n = 0, 1, 2, or 3).

Z
Dials in normal mode for this connection only. For example, enter the following command and press Return:

ATD 12345Z

I hope this help

Mohaed

This discussion is closed to new replies.