Discussion Locked

Modem flash crash

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
How do I restore my USR5610B Robotic modem's bios from a flash crash?

4 replies

by thechas

I assume that you have tried to re-flash the modem?
If it won't accept the flash, I don't believe that there is anything else a user can do.

You either have to send it to US Robotics, or find a friend who has the tools to perform device programming.

You might try removing all other PCI and ISA cards, and disableing all motherboard ports for the programming session, so that no other device is conflicting with the modem.

Chas

by marcusdavis1949

Sorry for the incompleted information submitted. Actually, I have not re-flash the modem, because I don't know how to do it. If you can, please tell me how.
Thank You.

by thechas

You should be able to follow the same proceedure that you used to flash the modem in the first place.

However, if the modem is not recognized by the BIOS when you boot the PC, then there is likely no way for the flash program to find and flash the ROM. Catch 22.

So, it is possible that you now have a dead modem.

I would check with US Robotics as to what they would charge to repair the flash for you.

Of course, after taking shipping into account, it is likely cheaper to just get a new modem.

Chas

by marcusdavis1949

Even thought your answer did not helped me because the problem is beyond your control, I do appreciate your prompt response.

This discussion is closed to new replies.