Discussion Locked

modem inop

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I've been playing around with computers for about 5 years now just came to bottle neck in this one weel three really.
hardware list first:
jet j530bf mainboards (i know not really the best choice but thats what they have)
sis 530 video
wd 10 gighard drives
64mb sdram
3com nic cards
brand new IBM modem internal 56k v.90

now the problem ?
the ibm modem card is suppose to be plug and play and it is in any motherboard i put them except for these jet j530bf. The motherboard will not evenfind it. all the other mainboards set it up on comm 5 irq 3 0r 11
I can;t even manully install it all i get is can't open port after its installed and will only install on comm 3 or 4
these modems are a ehternet combo card with the ethernet disabled no drivers installed.
they work just find in anything else i put them in . my customers like his computers and dosen't want to buy new mainboards or new modems. I have installed different modems to show him that it is a conflict in modems the other ones work find but they won't budge on buying new cards.
do you have solutions to this problem ?

7 replies

by montea7

I am not familiar with the Jet boards but have you tried to reserve an IRQ in the bios by setting it to Legacy rather than PnP to see if it can be installed?

by jmgartner

Win 95 or 98, and win2000 allow you to add ports thru contol panel..Use it to "install" comm 5 since that is what the modem likes... set the properties of the port to suit.

by csmith

This is one of those weird problems. Make sure that the secondary IDE channel on the motherboard is enabled, so the modem can not try to use IRQ 15. Force IRQs 3 and 11 to ISA and do a New Hardware install in Windows.
I am assuming these are the IBM ISA cards.
Regards, Chris

This discussion is closed to new replies.