Discussion Locked

Modem Issues

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have installed two new Action Tec V.92 56K modems. I am now able to send email and that is it and receive. When I search for a website it just freezes or kicks me off line and can't seem to download the site. Is it possible for the V.92 to be too new of a technology for my phone line or do you think it could be a hardware setting in the system that is causing this? Any ideas would be greatly appreciated.

Thanks.

7 replies

by thechas

A couple of ideas;

You say you installed 2 modems.
If both are in the same PC, do you have any hardware conflicts in device manager?

Do both modems pass the diagnostic tests under Control Panel/modems?

Do you have the latest version of Dial-Up-Networking installed, or some other software to handle the modem sharing function?

Are your DUN and TCP/IP settings correct for you ISP?

If these tips don't help, please provide more information about your system configuration.

Chas

by marck almada (py)

Hi,
Do you have installed the correct driver for your system??...
Are correctly configured ?.. things like a wait-callings,etc. Be sure... the V.92 is not supported for many ISP but Action have a way to pass this problem. I don't know... could beonly the configuration.

See http://www.actiontec.com/support/modems/pcilite.html for more information.

Another specific information of problems with 56k can fe found at: http://www.56k.com/trouble/connect.shtml

Send again your specific ActionTec Model to search more imcompatibilities with windows. :)

by dmiles

Check with your ISP and see if they are supporting the V 92,which is a little different and they may not have the proper setup for this modem connection

by crapaud ergo sum

if you are using XP for your OS the hardware does not show support, though maybe an update is available or what i am reading on it is old. answer three covers a possible, regarding "Actiontec's 56K External Call Waiting Modem supports V.44, a new data-compression protocol that delivers data rates 10% to 120% faster than before. Requiring ISP support of this standard, V.44 allows you to enjoy faster Internet browsing and increased data throughput for many popular applications." this could be read more than one way, suggesting support is needed or not. long shots, hope some answers.

todd

by freetech

do you have a serial mouse? if so, it may have a com port conflict and will cause your browser to freeze or not respond. second, do you have a multilink program installed? if not, the modems cannot work together, which may not be a problem in a low-bandwidth situation like e-mail. what o/s are you using? win98 and win2k handle bonded modems differently.
need more info.

by joea3320

Right-Click on "My Computer"
"Properties"
"Device Manager"
"Modem"
Check what the COM Port is set at
"Resources"
Check what IRQ it is at

Modify the Registry:
1. Run "REGEDIT"
2. Search for "Slownet"
Hit enter and change the value from "01" to "00"
3. Scroll down on the left to where you are in the "VxD" sub folder
Expand
Go to "COMBUFF"
Change the value for "Start" from "00" to "01"
Go to "VCACHE"
Change the value for "Start" from "00" to "01"

Now the Control Panel:
1. Open the Modem Applet
2. Click "Properties"
Change the port speed to "115200"
3. Save the change

Now the WIN.INI file:
1. Run "SYSEDIT"
2. Click on the "WIN.INI" file
3. Scroll down until you see [PORTS]
4. Go to the line where your modem is on (ie COMa:=9600,n,8,1,x)
5. Change it to "COMa:=115200,n,8,1,p"
Keep in mind that "a" represents what COM Port your modem is on.
6. Close and Save that file.

Now the SYSTEM.INI file:
1. From "SYSEDIT" click on the "SYSTEM.INI" file
2. Scroll down to [386Enh]
3. See ifyou have the following line "COMaFIFO=1"
If you don't then type it in.
4. Now the next line you need to type "COMaIRQzBuffer=1024"
Once again, "a" represents the COM Port and "z" represents the IRQ Number.
5. Save the file and close SYSEDIT

by gu1527t

Thanks for all your help. Believe it or not it came down to an ISP issue. I had a client that was using AOL and had a 33.6 number to dial into first. That was kicking it off. So I switched it to the V92 compatible/V90 dial up number for AOL and it worked fine. Can't use the call waiting feature but from what I have read I expected that issue. Thanks again for all your help on this issue.

This discussion is closed to new replies.