9 replies
by dmiles
First check the phone line to modem to make sure that it is inserted properly
One cause for this is the Hyperterminal could be open while you are trying to us dial-up networking,make sure hyperterminal is not in use
Open the Control Panel,double-click the System icon and check to make sure that Port is enabled and you donot have any yellow exclamation mark on modem
all else fails to clear this up try re-installing the modem
by lhardin389
by thechas
You didn't say what type of modem or OS.
I would make sure that you have the latest correct drivers for your modem and OS.
You may need to go to the mfg of the modem chipset to get the best drivers.
Go to www.driverguide.com or
www.modemhelp.org for driver links.
I have also had this problem where the modem is just incompatable with the motherboard.
by lhardin389
Hi,
You modem configuration may be set up to use a particular com port. Often this will be com port 1.
Make sure you've got the modem plugged into the right plug! If a tower configuration, its likely to be the top one.
...but I agree with TheChas. If its plugged in ok, then I'd be suspecting the drivers.
Cheers,
Tim.
Cheers,
Tim.
by lhardin389
by caquino3759
Try changing IRQ,right click my computer,click on properties,click device manager tab,click plus sign next to modem,highlight modem,click properties,click resources,check for conflicts,if any conflicts uncheck use automatic settings and try different settings until you find one with no conflicts,click O.K.,now try your modem. Good Luck!
P.S. You didn't mention how old of a system,but as mentioned in an earlier answer some modems and motherboards aren't compatable!
by lhardin389
by lhardin389
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending