Discussion Locked

modem problem

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I'm using a PSION DACOM Gold cARD MODEM. I have no problems connecting to the net but when connected no bytes are being sent or recieved. What could be the problem?

9 replies

by russ werner

This is more likely a problem at your ISP. Try a different ISP and see if problem goes away. Or call the ISP and explain what is happening and they can correct their end.
I have had this issue in the past on different computers and not always all the time. But they corrected it...

by acosgrove

I've had this problem as well, twice, and both times it turned out to be a problem with my network protocols. Try pressing alt and double-clicking on network neighborhood. Remove all the installed network components and then reboot. Once the system is back up, go into the control panel and into network properties. From there add only the following:

Dial-Up Adaptor
TCP/IP
Client for Microsoft Networks

This will reinstall all of the protocols necessary for your computer to access the internet. Try setting up your dial up connection the way your ISP suggests and this should take care of the problem.

by grantcom

Try searching your drive for winsock.dll If there is more than one copy this is the likely culprit. I would use the most recent version and it shold be in your Windows directory....rename all others winsock.old just in case you have to restore the deleted files.

by n1ipa

One of the biggest things that I have found is that the network proticols are damaged, but on the other hand you will find that uninstalling and reinstalling them does not help. One of the other fixes that you might try is to uninstall the network componets and then uninstall dial up networking and then reinstall dialup networking and then check the network componets to make sure that you have client for ms networks install, dialup adpt., and tcp/ip for the dialup adpt. And then to make sure that the primary network log on is set to client for ms networks. some isp's require that to correctly log on. the other thing that you might check on is also if your connect is set up for proxy settings, if proxy is set that can cause things not to work either. after checking or doing all of these things reboot the system and the one other item that you might do also is to delete the connectiod that you have a recreate it. These are the things that I work with from day to day.

This discussion is closed to new replies.