Discussion Locked

Modem Troubles

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We installed a new U.S Robotics 56k external modem,Software ,drivers ect. Everything looks ok. When We try to Dial out to a know good Isp# We here a busy singnal over the dial tone. This was not an issue 10 min before with the old modem. Tried reinstalling everything to no avail. Any advice is welcome thanks!

9 replies

by aseem_kumar_2001

Hi
Try dialing by unchecking the option "Do not detect dial tone."
This might causing problems. Also check the phone socket on the modem. It might have some fault.
Tell me what happens
Bye.

by josevs

Plug a phone in the jack where the modem is and make a call to see if the problem persist, if that is the case contact the phone company. Now is you can use the phone line ok, has to be how the modem software is configure in your PC. Try that and let me know.

by mpace

Check and make sure that you have the phone line plugged into the right spot. Oddly enough, it sounds like attempt is being made even when the jack is plugged into the phone port.
We have had that problem a few time when the cleaning crew accidentally uplugged and then replugged into the wrong spot.

This discussion is closed to new replies.