Discussion Locked

modem unable to dial up

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I'm using a internal modem for dial up internet access. When I dial up, there is a long buzzing sound from the modem. I move the PC to another telephone point and I'm able to connect successfully.
Does this mean that the other telephone point which I'm unable to dial up is faulty?

5 replies

by lumberjack

faulty is one option,
if in an office - it may not be activated - at home then yep - probably faulty

Again in office - some tel sockets may be on a digital system - others analog, chances are the working one is the latter (in uk anyway!)

do you dial 9 or anything before the tel. number called?

by jkaras

Can you plug a phone into the back of your modem while still connected to the outlet and get dial tone along with making a successful call? Are you using a power strip that you are plugging the telephone chord into as well as the other "known good Outlet" or just plugging straight in on both? Any splitters? Same chord for both outlets, and how long, over 15 ft? Answer these to better narrow it down but it sounds like a faulty outlet. Call your telephone company and have them do a line test to ensure standard. Lastly you may need an init string due to a semi faulty outlet that might pass the lowest standards since the phone techs never want to admit issue and pass buck, be prepared to show him both outlets and demand documentation of readings.

This discussion is closed to new replies.