Discussion Locked

modem won't accept commands

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I'm getting the error message " modem is not responding properly" whenever a "+" or a "\" is included in the win98 extra settings (init string) for a new Zoom model 2920 dual mode faxmodem. The latest flash upgrade and files dl's have been installed. Using no init string results in a connect of 24000 bps.

4 replies

by jjoeclark

First check to see if the keyboard is acepting proper commands, remeber your in DOS now.Hit every key and check result . or try modem on another PC.
Or hit the reset button on modem

by talon_aquila

Thanks for your input. The modem still won't accept a "+" or "\" command. I checked out the keyboard, etc. before i posted this question.

by talon_aquila

The modem has been tried in two different systems, one running win xp pro, and the other running redhat linux. init strings containing "+" or "\" are still not accepted.
Zoom tech support considered it to be defective and replaced it, with the same result, in all 3 machines. Modem is now property of friend of mine, so question is still valid, as he can't figure it out either.

This discussion is closed to new replies.