7 replies
by thechas
Possible causes of a blurry display;
Bad monitor
Focus adjustment
Magnets near the monitor
Degause circuit in monitor not shutting off.
The simplist thing to do, is to try a different monitor.
If the blurring goes away, then the monitor is bad.
Chas
by rrkanojia
by gigelul
Or try different refresh rate/resolutions from Display Properties/Adapter settings. Maybe your monitor don't support all. Also verify if current resolution is interlaced or not, check both variants.
Don't place your speakers near the monitor
by rrkanojia
by alpha-male
Usually this is the sign of a monitor beginning to "die". To make sure, hook up another moniotr and see if the problem continues. If not, it's the monitor.
I would try changing your resolution and refresh rates to see if it affects performance. Degauss the monitor and check the various settings available (some monitors give you a lot of control over the picture...some nothing but size and position).
One last thing to be aware of is your environment. Flourescent lighting can cause fits (mostly with flicker) but other electronics, magnetic fields, etc can affect your picture too.
Good luck getting this resolved...I know that having a less than sharp monitor can be a real pain.
by rrkanojia
by rrkanojia
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending