Discussion Locked

Monitor Problems

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a Gateway 866; 1-128 MB RAM;1-256 MB; With a Gateway Monitor EV700. I upgraded the built in Intel Graphics card, with a ATI Radeon ALL IN WONDER PCI Card. I installed the card in PCI SLOT #1. I had no problems untl a few days ago. Now here iswhat happens. When the computer starts up from a restart or BIOS update, the screen goes blank. When the computer starts up from a cold start the monitor was working. When I try to go into safe mode the screen blanks out again- amber light on monitor is steady. When the computer boots up to windows being loaded, the screen is fine, then I loose video. I have the newest drivers. Help

5 replies

by parvus1202

Well, try to boot on VGA mode, then fix the resolution and the frequency on properties. SOmetimes if Graphics card and the monitor resolution/frequency are not compatible, it will not boot up.

by thechas

Since you cannot boot into safe mode, I do not think this is a resolution / refresh rate issue.

I suspect that you have too small a power supply.
Since you have added both RAM and a video card, any other added hardware would bring you over the limit of what the standard power supply can be expected to deliver.

If you also have additional CD or hard drives, then install a larger power supply.

Chas

by richard_barsby

Hi at boot enter the bios and do nothing leave and wait if monitor still blanks out turn off monitor leave for a while then turn on again, if the picture comes on and the bios screen is still being shown the problem is in the monitor.

EV700 monitors suffer from a number of problems whichever chassis is fitted Mag or LG.

Rich

by jgoldst7661

I tried everything. I removed the video card, and used the motherboards. Still having the same problem

by rcom

Agree with last response. Gateway monitors have problems with horiz output and if pushed will go out. If you have available try another monitor to see if it works. That way you can eleminate the possibility that something has happened to the PC. The new card may have taken the monitor to places it couldn't go.

For what a new 17 inch costs I'd consider replacing the monitor with something that will give you the picture the ATI card is able to produce.

This discussion is closed to new replies.