Discussion Locked

Monitors

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I recently purchased a monitor really cheap but I can't get it to work correctly. When I tested it out it was connected to a Mac conputer but when I got it home and connected it to my computer (Windows) I can't get a clear picture. What can I do if anything to correct this problem?

7 replies

by ann777

If you've tried the manufacturer's drivers with this device and if you are following the recommended refresh rates with the monitor, and device manager has no complaints, but it's still blurry, I'd return it.

It should come with a warranty. I'd say to return it and tell them what you've done to try to get it to work. If you want to try another of the same model, then tell them that. Ultimately, if you just recently purchased it, you are the one in control.

by wlbowers

Check the refresh rate in your video display settings. You might want to try to increase the refresh rate.

I use a mac monitor on my test bench with no problems.

By the way mac monitors have had the 3 row db connector since the g3 came out.
Good Luck Lee

This discussion is closed to new replies.