Discussion Locked

Motherboard/bios update

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I know the bios type I have but need to upgrade it. I don't know where to look to find an update for my bios. It is Award Modular Bios V4.51PG. The reason I have to upgrade is because it won't see all the space on my new hard drive.

6 replies

by timwalsh

Most BIOS manufacturers create custom BIOS for MB manufacturers. They also usually allow to manufacturer to further customize the BIOS to fit their particular needs.

Therfore, to get the correct BIOS update, you need to determin the manufacturerof your motherboard. Once you have done this you need to search the manufacturer's website for available updates.

by thechas

Tim is correct on how to check for a BIOS update.

Unless the update is for your SPECIFIC motherboard DO NOT flash your BIOS.

Based on the BIOS revision, I am going to assume that you will not find an update that supports large hard drives.

There are several other ways to correct the problem:

1. Custom BIOS from a 3rd party vendor such as www.unicore.com
Expect to PAY around $70 for a custom BIOS.

2. PCI IDE controller card.
This is my personal recommendation.
For around $30, you not only get to use the full capacity of your hard drive, you also get an upgrade in the IDE controller that supports the full data transfer rate of the new hard drives.
I assume that your present IDE data transfer rate is UDMA33.
An IDE controller card will be either ATA100 or ATA133. Yielding a 3 or 4 times improvement in data transfer rate.
Plus, you have the ability to add up to 4 more IDE devices to your system.

3. Use the drive (BIOS) overlay software from the hard drive manufacture.
While this is basically free, many people have problems when they use the software package.
Perhaps the biggest problem is if the drive is a slave and is moved to a different system.
Without the boot drive (master) with the drive overlay software, you cannot access the data on the drive.

Chas

by rvickers78

Open up the machine and look on the board for a name and model number. If you bought a PC from a store, check out the manufactures web site and they will give updates. Never use a "generic" bios. And befor you upgrade the bios, make sure you makea back up copy incase something goes bad....otherwise you will regret it.

by wlbowers

Go to this site and download sandra standard. Load it and run the mainboard information.

This will provide you with manufacturer, model, version and bios id.

With this information you can go to the motherboard oem's website and get the latestbios update.

Good Luck Lee

This discussion is closed to new replies.